Service Visit ‘A’
Generator Service Information and Checklist.
Each check is verified on the Test Certification copy left on site.
‘A’ SERVICE
CHANGE
- Engine Oil or Analyse Oil
- Oil Filter Elements
- Fuel Filter Elements
CHECK
| Water Level | Battery Level |
| Antifreeze | Injection Pump |
| Water Hoses/Clips | DCA |
| Tappets | Start/Stop Circuits |
| Fan Belts | Battery Charge Rate |
| Engine Instrumentation | Guards Secure (report missing) |
| Radiator Cooling System | General Inspection of Engine |
| Dynamo Belts | Run Engine On Load, if possible |
| Cold Start Device | Fuel/Oil/Water/Exhaust Leaks |
| Water Trap | Water Temperature Gauge |
| Lift Pump | Oil Pressure Gauge |
| Turbo Oil Feed | Alternator Connections |
| Starter and Dynamo | Relays, Timers, Bases |
| Injector and Pipes | Panel |
| Air Filters | Instrumentation |
| Brushes and Slip Rings | Engine Protection L/Oil, H/Temp |
CLEAN
- Battery Terminals
- Starter Terminals
GREASE
- Alternator Bearings
General inspection of engine to include checking for secure guards.
Test run of engine (on load if available) checking for oil/water leaks, etc.
REPORT
Findings to responsible site person
Complete the test certification, date, sign off.
Leave Hard Copy with Generator
