Deep Sea Controller – How To Test A Generator OFF Load – Weekly – DSE 6110

HOW TO PERFORM A MANUAL OFF LOAD TEST

 

1. Turn Breaker on the Generator to OFF position

2. Press Manual Mode button on display ONCE only

3. Check Manual Mode LED is lit

4. Check Display Reads Manual Mode.

5. PRESS GREEN Start Button for Approx seconds Engine will start up and begin the OFF load test

Close generator door until the test is over

5.b If Engine fails to start, check screen for any faults, check fuel level clear faults using reference manual if possible.

5.c Repeat steps 4 – 5

5.d If engine still fails to start contact Power continuity Systems 0845 055 8455, Mobile Numbers 07770 236866 / 07903227774

6. Run Engine for approximately 5 Minutes
This is the OFF load Generator TEST

Press RED OFF Button ONCE to STOP engine

Press Auto Button ONCE and check Auto LED is illuminated

Check Display Reads Auto Mode

When the OFF Load test in Complete Turn the Breaker on the Generator back to ON position

Download our PDF guide here:

HOW TO PERFORM A MANUAL OFF LOAD TEST

Search – Knowledge Base

Talk to Us: